Interested to Buy Any Domain ? << Click Here >> for more details...
How much quantity plaster area 100 sqf ,redho 1:6,plaster
15mm
- 3 Answers
- 6991 Views
- I also Faced
- E-Mail Answers
Answer Posted / kumar
For 100 Sft - - .947 of 50 Kg cement Bag.
= .947*50 = 43.75 Kg of cement.
| Is This Answer Correct ? | 0 Yes | 2 No |
Post New Answer View All Answers
in design case of structural member best suitrable percentage of steel limit is what
Suggest how many column, beem, etc required for 30 mtrs x 21 mtrs width x 8mtrs height for industrial shed of ground floor. I want to know the quantity of tmt steel consumption and Concrete consumption for budgeting
A doubly reinforced concrete beam is 25 cm wide and 50cm deep to the centre of tension reinforcement. The centre of compression is steel is 5cm from the compression edge. The areas of the compression and the tension steel are 10.16cm2 and 12.56 cm2 if m=18 and the bending moment at the section is 7,000,000 N-cm. Calculate the stress in concrete and steel.
I have an plot with area 35*47 = 182.77 sq yards. Out of this iam planning to construct house with 1350 sqfeet each floor .iwanted to build a G+2 house.Need cost estimation for each item
What are the disadvantages while using stone dust as filler in pavements?
why we use 19x9x9and 20x10x10 but not other
How to do bbs in excel format
Is it necessary to apply tack coat over the primecoat. IF not what happens.answers other than 1.to superimpose the next layer(2) to adhere the layers so as to form homogenity.
WHAT R THE GENERAL TECH QUESTIONS ASKED FOR THE INTERVIEW FOR AN AUTOMOBILE INDUSTRY,SPECIALLY DESIGN DEPT
In Residential home construct footing,beam, column,lintel,rcc roofs which dia rod used how to self assumed
pls send me interview question paper with answer of EIL/AAI/UPSC/RPSC because i am doing prepration of compitation exam of UPSC for the Asst. Executive Engineer
What is the density of 1:1.5 (Cement:sand) ratio in plaster? And Conversion in 12.5 mm thickness per square meter? Howmany Kg of Cement square meter in ratio of 1:1.5?
what is the use in canals of longitudinal drains and cross drains in lining areas?
what is the use of steel rods of 16mm or 20mm used for 4.45mts for closing gutter.one mate consumes how many kgs with a gap of 6inches.
What in your opinion makes you the most suitably qualified candidate for this post of civil engineering technician?
