Answer Posted / vikas kumar
IT IS AN ELECTRONIC DEVICE USED TO CONVERT THE DATA OR
INSTRUCTION INTO CODES AND TO RE USE D DATA DECODER IS USED
TO OBTAIN THE DATA IN REAL FORM.
Is This Answer Correct ? | 9 Yes | 2 No |
Post New Answer View All Answers
What is mean by spike arrester(Voltage Operated)
As we know diode work on both negative and positive but converting ac into DC we have to given a/c from negative of diode or positive side.please give me answer.
What is the most essential condition for the voltage build up for a d.c. Shunt generator?
how do you choose the cable size as per amps rating & the voltage drop for the same.
why current flow to the opposite direction of flow of electrons???????????
IF I KNOW THE AREA OF CROSS SECTION OFTHE WIRE , WATTAGE OF THE LOAD ,VOLTAGE SUPPLY WHAT IM GIVING TO THE LOAD AND ALSO POWER FACTOR OF LOAD ....... SO GIVE ME FOR WHAT AMOUNT OF CURRENT I SHOULD USE WHICH TYPE OF CABLE?
what shall be no load voltage of 132/33 kV transformer ? is it 33 kv of 34.5 kV
what is POTT and PUTT explain?
How to check the thermocouple is correctly connected to cable for K type? (i,e positive pole is connected to non magnetic conductor and negative pole is connected to magnetic conductor)
What is the difference between Static and servo controlled voltage stablizer?
Draw the vector diagramme for Asynchronous Induction Generator at noload,half load and fullload.
If a air condition consume 2.50 to 3.00 amp then how much it will consume in watts if it is running 10 hours out of 24 hours????
How generating electric power export to grid from the generating station ?
in the directional overcurrent and earthfault protection,normally we are setting the angle 45 deg lead for phase fault overcurrent and -45 deg lead for earthfault fro forward direction.but both the fault are operating on the same angle region only.why?how the relay will response?
I meggared my 2c*70 sq mm AL AR XLPE cable. its one end show 50 M ohm . is my cable is safe for laying. I have only one phase and neutral.