If the Power Factor of generator is 0.85...What does this
mean and Can the motors connected to this generator operate
at PF more than 0.85 ?
Answer Posted / eeaadil
Yes motor certainly can operate at better PF than the Gen.
Set as PF is the motor's very own property.
PF of a Generator only specifies about the generator's own
conditions and specs.
Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
how we can find of current direction(supply comming/out going direction) when a transmission line passing through sides.
how to compare with Relay settings for HT< panels, RMU panel, and PSS CSS transformer?? 1) Load amps, 2)Tripping time, 3) CT ratio, 4)Cable size 5) Transformer KVA rating 6) transformer full load amps
It is desired to flood light the front of a building 42 meters wide and 16 meters hig.Projectors of 30 degree beam spread and 1000 watt lamps giving 20 lumen/watt are availabl.If the desired level of illumination is 75 lumen/m and show a suitable scheme.Assume the cofficient of utilization, deprecitation factor and waste light factor are 0.4, 13 and 1.2 respectively.
the site measured knee point voltage of protection class CTs should be greater than rated knee point voltage? what about meetering class CTs. Should it be below the rated knee point voltage?
What is mean 2XWY
hello!my name is sheikh iam preparing for indian engineering servieces,please send me the old question papers..to sheikhshaazforjobs@gmail.com
Two bulbs of 100w and 40w respectively connected in series across a 230v supply which bulb will glow bright and why?
whether fibre optic cable in high voltage earth conductor is used for protection circuits
hi frds, i m electrical engineer.can i get cdr for electrical engineer if u have then send me on my mail id its jayesh_ee88@yahoo.com.please help me frds
WHAT IS THE FAULT WHEN 100HP TURBINE MOTOR TRIPS, LIST THE FAULTS AND ITS TRABULESHOOTING TIPS.. MY AUTO TARNSFORMER STARTER TRIPS
How can we design a HVAC Plant room which includes AHU,FCU,Chillers,Cooling towers, Pumps etc & how will they work? any Drawing if possible?
how to interlock 3 nos MCCBs using under voltage coil. please provide me circuit diagram?
what are the sample questions asking to the test cunducting for electrical superwising lisence test?
Explain the construction of the conservator, operation and purpose, and draw the diagram of the conservator.
- two pumps must work with them at the same time but if the first pump start the second pump must delayed for some time to start also , with motor rated power = 90 KW and rated voltage = 380 V and rated power factor = 0.85 lag please draw the power and control circuit for it and determine all circuit components parameters that you use it