What is the difference between M20 and M25 concrete?
- 8 Answers
- 25275 Views
- L&T, I also Faced
- E-Mail Answers
Answer Posted / bharathidasan
different strength
| Is This Answer Correct ? | 3 Yes | 2 No |
Post New Answer View All Answers
What does a construction cost covers and what does not?
how calucate cement sand ratio for plstering
Requirement of cement, and steel 1:2:4 ratio concrete in 1128 Sqft area(Cement No of bags, steel in Kgs)
what is the name of shuttering oil used in oman
Can any body help me out by telling hoe swelling pressure test of soil is carried out ? some body told me the procedure & formula (change in length /116.3*100%) but still i am confused ? pls help.
How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 100 microns?
How musch steel i.e. angles, channels,and square pipes are required per square feet for a steel roof of residential two storied building?
why we can use dust in concrete insted of fly ash
What out turn civil works
what will be price of 1:2:4pcc per kg?
what might be the problem faced in the near future if the M-sand is used in the place of river sand during wall plastering? (As per IS)
As per Kandal suggestions, we have implemented rolling starts on 140 (+/- 5) degrees and we kept 3 rollars to complete the rolling before falling 125 degrees and the Aggregate AIV is below 22. But When the DBM bed is being rolled 3rd high viabration, (Before 1 plain & low ,2 high Viabrations), the aggregate is getting sharp edge agg. projections are damaged. As the literature is said that, the VG-30 Grade having better control the temp. susceptibility than Penetration grade. if so we could not get this problem at site. But we are facing on site. let me know.
how lap length is increased with increase of Grade of steel?
what is flashing?
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
