Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / syed azam hussain
Transducers
[<Lat. Trans, across + ducere, to lead]
Devices to transform signals between different physical
domains.
Taxonomy
Active: input signal modulates output energy; e.g.
liquid crystal display.
Passive: input signal transformed to output energy;
Bidirectional, e.g. motor/generator;
Unidirectional, e.g. photodiode
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
Meaning of the following a. IOP- Manimum; b. IOP- Maximu,;
What is the use of temprature compensation?
There are two chlorination tonners both are connected to two pressure swithes and the pressure switch is connected to SOV which operates the valve to changeover the tonner selection i.e if pressure one tonner goes low the other tonner should come in line if it is inautomatic selection design a circuit using relays ?
how to measure draft pressure in transmitter pl. give its single line digram
what is droop in governer ,type of droop ,how it work
How to calibrate the flow transmitter
what is the difference between profibus and controlnet networking.
How is automatic reference junction compensation carried out in temperature recorders?
we want to control pump in let pressure and tank (for exp) our inlet line if water cam and pump will on and when our tank will full pump will off also if our inlet pressure low pump will off even tank not full.this pump i want to uses on our water supply line.
How to calibration a control valve?
Can anyone convert a 5/2 way or 3/2 way valve into an ISO valve?
How to do gas analysers calibration in AUTO and Manually by using zero and span gas?
1.what is controller proportional gain 2.what is the controller intergral action time. 3.A proportional plus derivative controller that has a proportional band of 20% and a derivative action time of 0.1 minutes. Construct the shape of the output waveform for the triangular input if the input rises and falls at the rate of 4 units per minute.
Please tell me details about Sox,Nox,SWAS analyser????
why use 50% lel methane gas concentration for gas detector calibration instead of 60% lel gas concentration whereas the hi alarm set at 60% lel.
