. Draw the vector diagram and condition for the following:
1) Dyn1
2) Ynd0 3) YnYn0
- 1 Answers
- 3401 Views
- I also Faced
- E-Mail Answers
Answer Posted / wareagle
You can Google each one and get your answer.
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
why fractional pitch winding generally used in alternators?
how give earthing conection to household equipment?
What is the effect on power factor, shown by a trivector meter; incase of reverse phase sequence. If the power factor of a system is lag what meter will show in case of reverse phase sequence connected to the meter. and What in case of lead.
what will be the min and max voltage flow from neutral to earth?
is it possible to say motor horsepower number without seeing name plate(when name plate damaged)
why transformer tank is in rectangular shape what happen when it is in step shape
what is the concept of directional power?
what is meant by IGBT how they differ from tyristor ?
-What should be minimum value of insulation resistance and maximum value of earth resistance at any electrical instillation and what is method of testing the same.
how to calculate the cable current ratingand and how much of distance the rating will be ok will the distance is incresed what the action we take
I have a relay contact rated at 220v dc which is supplied with a 24vdc from the panel,for it to trip the dampers(24vdc).What if the application of the relay changes so that it should work at its rated 220vdc then will it work at 24vdc supply given or any other consideration needs to be taken .....
how to calculate fuse rating for a motor
WHAT IS MEANT BY SHEATH VOLTAGE IN 132Kv cable?
In case of salient pole alternator when number of poles are 4 or more than 4 it helps the flux wave to be sinusoid as air gap length is increased from center to tip , but if the number of poles are 2 how does the flux wave is sinusoidal?
Can i use the B-curve MCB instead of C-curve MCB
