Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / gowthamisaranya
grid means interconnection of generating stations and load
centers to transmit power at constant frequency and voltage
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
Why r u using pf panel. what the uses
.php|
hi frnds what is meant by harmonics & what is meant by third hormonics,where its will occur ?thank u
HOW WORK HEAT PLATE EXCHANGER
Why 30kw 40 hp 4 pole 3ph induction motor over heated?any steps on reduction in heat?
what is the need to express current and voltage in rms value? rms value is also called as effective value,what is effective value?
what is the difference b/w UHVDC and HVDC(LIGHT)?
What are the advantages of stationary armature and rotating field system?
what is the method of earthing of a transformer using electrodes?
how to calulate short circuit current for the following: 1.cable connecting 11KV of 22KV/11KV transformer to 11Kv of 11KV/415V transformer 2.what cable size should i use.
What is systematic error?
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
In Power cable specification what is U0/U and Um.
what are the types of electromagnetic forces developed in practical transformer?
What is a copper loss or i2r loss pc?
