What is the full form of AND,OR and other logic gates
Answer Posted / monisha
there is no full form
if u know the full form means pls put it frds
| Is This Answer Correct ? | 5 Yes | 4 No |
Post New Answer View All Answers
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
how withstand of hi-pot test outputs of transformer wire 2.5mm
how we findout a ignater is faulty or not?
how can service sitting be setted for MCCB?Example for sittings IR (CURRENT RATING),IS(CURRENT STARTING)IO (current operating)?
how cables go in and come out for distribution from the feeder pillar box?
How we can calculate the consumption in kwh of motor on basis of kw @100% load, @50% load & @ no load.
WHAT IS THE TECHNICAL SPECIFICATION OF C CURVE & D CURVE LEGRAND MAKE MCB
What is a differential amplifier?
how to calulate short circuit current for the following: 1.cable connecting 11KV of 22KV/11KV transformer to 11Kv of 11KV/415V transformer 2.what cable size should i use.
Following test should be conducted to find out relative polarity of transformenr terminals A no load test B back to back test C phasing out test D none of above
How to reduce the static electricity producing in solvent room? By P.D.Patil BioCon
Is MEN and RCD related to each other ?? IF yes then how??
What is CCT (Correlated Color Temperature) ?
what is the principle of operation of CFL ??
please explain how to do 'pole drop test' on generator?