Interested to Buy Any Domain ? << Click Here >> for more details...
DISCUSS THE SHAFT MOUNTED D.C. GENERATOR
,BASED ON EXCITATION
SYSTEM IN ELECTRICAL SYSTRM
- 2 Answers
- 5264 Views
- I also Faced
- E-Mail Answers
Answer Posted / shibuss
In AC generators two types of excitation systems are used
1. Static excitation system &
2. Brush less excitation system
In static excitation system generated AC is stepped down and
converted to DC using rectifier bridges and fed to the field
(Rotor) through slip ring and carbon brush.
In Brush less excitation system the rectifier bridges are
mounted on the shaft of the generator itself. The power for
this rectifier unit is obtained from a permanent magnet
generator mounted on the shaft. The advantage of this system
is that DC power can be directly fed to the field
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
IN MY SYSTEM THERE IS ONLY OVER CURRENT EARTH FAULT RELAY IS AVAILABLE. FOR THE UNBALANCE SENSING IS THERE ANY RELAY IS AVAILABLE? THE SAME CTs WHICH ARE USED FOR THE OVER CURRENT EARTH FAULT RELAY CAN USE FOR UNBALANCE ALSO?
WHAT IS AIR GAP VALUE IN MM FOR A 11KV BUSHING OF 11KV/440V DISTRIBUTION TRANSFORMER. AND AIR GAP VALUE OF 25 KV BUSHING OF AT TRANSFORMER OF 25 KV TRACTION. WHAT IS THE CALCULATION FOR THE AIR GAP PERMITTED FOR BUSHINGS AT DIFFERENT VOLTAGES.
if there are six generators (3 gas CATT, one Jenbacher o1 MW each, and two nos Diesel 01 no 01 mw other 0.65mw EDGs ( say), 3 CAtt gas set have identical pole pitch,01mw EDG and Jenbacher gas Set have different pole pitch, how their power connection can be done to connect a common bus bar during installation. in short, how different pole pitched generators power connection can be done to connect a common busbar system through generators incomer ACBs.
List advantges of active filter over passive filter?
how to calculate current carring capacity of cable and cable selection? 1) copper flexible cable 2) copper armoured cable 3) Aluminium cable
ho can we calculate the conductor insulation value according to their ratings like voltage,current etc.how insulation value related with voltage,current and power of amachine
What is the differentional relay...what is the work of this in power Tx. how it is works..
Mention how NPN and PNP transistor works?
Will any motor burn if voltage provided is lesser than the rated voltage???? If yes, then how is speed control possible with voltage control
what is a pilot wiring and whys that called a pilot wiers
how u select control transformer for a mccb panels or any panels?for expample we hav 440 volts maim supply and control volts is 230v?
what are the tests comes under the type test, what tests comes under routine tests.
What is the reason that the humming sound is coming from the induction furnace panel?
EXPLAIN THE ESSENTIAL FACTORS WHICH INFLUENCES THE CHOICE OF SITE FOR A HYDRO ELECTRIC POWER PLANT
Who many reason of ignition fail ?
