Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / abhijit
Coarse-grained Soils (more than 50% of the total material by weight is larger than 75µ IS sieve)
Coarse grained soils shall be sub divided into two types,
Gravels (more than 50% of coarse fraction ( ? 75µ IS sieve) is larger than 4.75 mm IS sieve)
Sands (more than 50% of coarse fraction ( ? 75µ IS sieve) is smaller than 4.75 mm IS sieve)
Fine-grained Soils (more than 50% of the total material by weight is smaller than 75µ IS sieve)
Fine-grained soils shall be sub divided into three types,
Silts and Clays of low compressibility (Liquid limit less than 35%)
Silts and Clays of medium compressibility (Liquid limit greater than 35% and less than 50%)
Silts and Clays of high compressibility (Liquid limit greater than 50%)
Highly Organic Soils
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
PL.tell me about civil engineering questions with answer
How reactor of SBR installed , is it be over ground, fully under ground or semi sunk ?
How to calculate concrete in percentage wise ,for example cement 18% sand 40% aggregate 40% and Stell 2% ,I need and??
what is the Purpose of Adding 20% of wet mortar & 1/3rd to Dry Mortar for PCC & Plastering & Rcc .is there any standard method for adding this .?
How much quantity of cement Bag for block masonry (1:4) for 1 cu.m? Block size (150x200x400) Mortar Thickness 20mm
In cement concrete how to check a quality of material also proportion of material at site ?
where can i get the previous question papers for rrb section enginerr (civil)
what is the water cement ratio for plastering
What is a tensile strength? What is the tensile strength of wood?
How to calculate volume of concrete & steel on tank foundation & ring wall ?
how to check and keep control on the wastage of material at site
what is the hanekom repairing material after concreting work
Define unit atmospheric pressure? Difference between gauge pressure, absolute pressure?
What Reinforcements Are Used In The Process Of Prestressing?
what is the maximum number of course that can be laid according to IS code and the max height.
