Interested to Buy Any Domain ? << Click Here >> for more details...
how to calculate the required qantities of cement, Sand and
aggrigate to prepare 1 Cum of concrete mix 1:2:4
- 5 Answers
- 25347 Views
- I also Faced
- E-Mail Answers
Answer Posted / vikas patil
For 1 Cu.m Concrete (1:2:4)
Cement =1.52/(1+2+4)=.217 Cu.m=.217/.035=6.2 Bags
Sand=(1.52*2)/7=0.434 Cu.m
Agg.=(1.52*4)/7=.86 Cu.m
out of 0.86Cu.m of Agg use following Proportion of Agg.
20mm Agg=0.65*.86=.56 Cu.m(65%of 0.86Cum)
&
10mm Agg=0.35*.86=0.3 Cu.m(35%of 0.86Cu.m)
Summary=>
Cement=6.2 Bags,
Sand=0.434 Cu.m,
20mm Agg=0.56Cu.m,
10mm Agg.=0.30Cu.m
| Is This Answer Correct ? | 1 Yes | 4 No |
Post New Answer View All Answers
how to calculate the material from ratio of work PCC, RRM,POINTING, RCC
WHERE CAN I GET THE PREVIOUS QUESTION PAPERS OF APGENCO FOR THE THE POST OF Tr.ASSISTANT ENGINEER(CIVIL)
Coverage of 25mm.thick ratio of 1:4 cement mortar?
Explain major differences between routing maintenance and major maintenance.
Before casting a basement roof slab which is connected with retaining wall surcharge load (i.e. sand or earth filling) outside the retaining wall is prohibited because of––
Providing and casting in situ cement concrete M-25 of trap/granite/quartzite/gneiss metal for rcc, Providing formwork,Curing the concrete and Complete. what is rate per Cum. and what is rate for M-30 Grade Concrete.
how to calculate cut length of re-bar in a circle . because we not place same length of re-bar in whole circle maximum in center and minimum at corner so how to calculate middle bars???
what radial pressure, the NP2 class rcc pipe can sustain?
what is polity
How much cement,sand,bricks and water needed for 1square metre brick work?
1. 1. The mass of a chunk of moist soil is 34 Kg and its volume is 0.012 cu. Meter. After drying in an oven, the mass reduces to 14.25 Kg. Determine the water content, the density of moist soil, the dry density, void ratio, porosity and degree of saturation. Take G = 3.25
What are the basic use of runners and standards of pipelines?
How to calculate steel for beam slab and column
The largest size of paper used in plotter to print the drawing made by Autocad .
what is Bearing Capacity,How to determine it?
