Interested to Buy Any Domain ? << Click Here >> for more details...
how to connect the three phase capacitor in three phase
star/delta connection motor?
- 1 Answers
- 6353 Views
- I also Faced
- E-Mail Answers
Answer Posted / sheldon
The purpose of connecting a capacitor in star- delta motor
is to improve the capacitance (specially at the start). So
we can connect the capacitor in star connection, in parallel
to the motor.
| Is This Answer Correct ? | 4 Yes | 3 No |
Post New Answer View All Answers
following are the questions asked in interviews: 1) Considering the short circuit fault, which switchgear is preferable, SFU OR MCCB? Which operates faster? whicg one is popular in Indian Market and why? 2)Define SCPD. What is type2 coodination? 3)Why the contactor rating is higher for the fuseless selection than for fuse selection? whether the ratinf of SFU or MCCB remains the same in both the cases? 4)If the HP rating is known then can you calculate the ratings of L.V Switchgear(SFU/MCCB, contactor, OLR) without using the selection chart?
What is the lower limit of break-down voltage of converter transformer.
What is the maximum percentage voltage drop (vd%)for a motor control center
We have a distribution transformer of 750KVA/11kv/440v and an AVR (Servo Stabilizer) of 750KVA on the LT side of distribution transformer. Also we have an ACB of 1200A on the output of distribution transformer (that is on the input of AVR). We want to have an MCCB on the output of AVR. What should be the rating?
What is the working principle of MIG welding? and its out put Voltage?
one split ac how can told of this ac which Tr tell me us
What is purpose of reactor?.What is different between line and bus reactor?
What is the basic of DTH.
What happen when neutral point connected to core balance current transformer? (Neutral point of an alternator of a 180KVA DG. Neutral point connected to CBCT means enter to the CBCT)
how can i change the rotation of the AC single phase induction motor and show me by diagram
how ups works ? various parts of ups and working principle
How are load losses and no-load losses measured at site in a DG set?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
what are the difference between AC lamp and DC lamp
Is it required to lay 2 runs of GI wires along with armoured cables from one power DB to another Power DB?
