Interested to Buy Any Domain ? << Click Here >> for more details...
What is the proportion of cement agg. and sand for M20,M25
and M30?
- 12 Answers
- 35144 Views
- I also Faced
- E-Mail Answers
Answer Posted / muthazhagi
M 15 - 1:2:4 , M20 - 1:1.5"3 , M30 - 1:1:2
| Is This Answer Correct ? | 3 Yes | 12 No |
Post New Answer View All Answers
factory shed foundation l=4, b=3' d=8' rcc foudation for top to bottom pl tell me cement ,steel ,sand ,labour cost ,excavtion,soil is weak not so hard
I want to know the relevant IS codes of practice which deals with different testings of cement-sand mortar (nominal mix)that is being normally used for brick work or plaster work in the construction work.
What are your goals?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
Any strength is a stress but any stress is not strength
Explain the different types of building contracts?
What are the materials used in building a gravity dam?
Journal entry Gross salary 10000 Tax 1000 Employee contribution 2000 Employer contribution 2000
What is zoning permit?
what is right & short method of measurement of slab&beam
Technical Question of Civil Engineering
What quantity of 1.0 m3 bricks required?
Before casting a basement roof slab which is connected with retaining wall surcharge load (i.e. sand or earth filling) outside the retaining wall is prohibited because of––
how to calibrate the RM 800
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
