hi...
Can anybody give me description of type-2 coordination, IP
protection, NEMA standards ? Thanks..
- 2 Answers
- 3017 Views
- KSEB, I also Faced
- E-Mail Answers
Answer Posted / shyamal rauthan
IP means international protection.
ie. IP 65
6 denotes the protection of equipment from and solid waste.
5 denotes the protection from water
| Is This Answer Correct ? | 0 Yes | 2 No |
Post New Answer View All Answers
what is the safe meggar values for motor, transformer HT, LT and Cables? IF we want to replace I/C bay at our 220 kv substation which is of 140 mw load capacity bay to be replaced by 400 mw capacity bay.other than CT(1200/1) what are the other equipment i have to replace. why we generally use 3.5 core cable or in other word 1/2 core for neutral and also confirm me that in balance conditiob(3 phase)current in neutral will zero
working principle a.v.r. ?
If a transformer primary winding operates at 240v, the secondary at 120v and the load is 1500w & the transformer is rated at 92% efficient, what's the current flowing through the primary winding of the transformer? What is the formula for finding this?
Explain Even and Odd signals?
What is the unit audit? if our Max demand is something and we found much more unit then how to improve our max demand?
In layman terms, what is the difference of Dielectric strength and dielectric constant when speaking of an insulating oil
how to know the diffrential relay setting of 06mva step- down (delta-star)transformer?
please send 5yearje solved papers on my email himmatsinghnathawat@gmail.com
What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works?
Write down the brushes of a de machine.
which motor have relatively high power factor and what is reason for have high pf? 1.capacitor run motor 2.shaded pole motor 3.capacitor start motor 4.split phase motor
Define gain margin?
What's mean HVF & HAF in Vacuum Circuit Breaker?
what are the difference between PLC and embedded
In our plant we have installed new MCC with ELR and CBCT which is detecting some leakage current in the system but it leading to some confusion when to check that in which feeder which is drawing current we put off the whole panel itself but still CBCT detecting some leakage current so can anybody ans me , where i am going wrong or how to detect whether its actual leakage or CBCT malfunctioning.
