Interested to Buy Any Domain ? << Click Here >> for more details...
TRANSDUSER MOSTLY CONVERT WHICH ENERGY INTO ENERGY ?
- 6 Answers
- 8924 Views
- DVC, I also Faced
- E-Mail Answers
Answer Posted / harsh sharma
one type of energy in to another type of energy
mainly non electrical quantity in to electrical quantity
such as piezo electric materials
those which converts electrical quantity in to non
electrical quantity is known as inverse transducers such as
fan
| Is This Answer Correct ? | 16 Yes | 1 No |
Post New Answer View All Answers
hi! i want to know about mpse exam.
please send the sample qustion paper for iocl written test ..
is motorized valve closed when power shutoff?
WHAT IS THE CAM POSITION IN CONTROL VALVE POSITIONER ? WHY IT IS USED?
Why even multiple power supplu r used in instrumentation system?
What is motion balance principle?
in natural gas indirect water bath heater,how to prevent the problem of backfire from firetube during ignition...becoz of this backfire performance of wbh is going low.
Why use ball valves on Gas pipelines instead of gate & or globe valves...means basic diffrence or use of these valves..how designers knows this type of valve with rating is required...
How to work temperature gauge?
why we take %i0.0 as input for twido plc
Area classification, Equipments, Gas groups, temperature classification, Ingress protection, Fire Extinguishers.
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
What is compensation for flow ? Why we use compensation ? What are the factors of different compensation ? We not use then what problems may happen ?
Why humidity limit is 30 to 55 % for raw material storage?
if in a level tx height is given, how u calculate the ranges of the tx?
