Interested to Buy Any Domain ? << Click Here >> for more details...
what are the sources in ELSD,PDA, RI and UV Detectors?
- 1 Answers
- 8166 Views
- I also Faced
- E-Mail Answers
Answer Posted / analyticalstudent
| Is This Answer Correct ? | 8 Yes | 4 No |
Post New Answer View All Answers
My question about gas chromatography sulfur chemiluminsecence detector. I test unknown sample gas by GC-SCD (calibrated ) and the result of *H2S is 279 PPM , *but when I test the same sample with the GC-TCD (calibrated ) the value of *H2S is 2500 PPM . I'd like to inform you that both GCs are calibrated and have very good operation conditions with stable parameters . the question is if the sample gas with higher H2S over detection limits of SCD detector (1000 ppm). why the result it 279 ppm Best regards
is it necessary to do HPLC calibration at wavelength 315nm if we are doing analysis at this wavelangth
please explian me about area normalisation method,diluted standard method,impurity vs impurity and which one has to be selected in method development
what is the origin to prepare standard operating procedure
Why only Copper standard is used to calibrate Atomic Absorption spectrophotometer?
Identify problem faced when mass spectroscopy is used with HPLC system ?
Why irmoisture balance is used for corrugated box moisture testing
what is the difference between potentiometric titration and karl fischer titration?
mahagenco syllabus for the post of chemist
I have compare C2H2-air and C2H2-N2O flame AAS on determination calcium. Both use same range of std to plot calibration curve. (2-6ppm) When i measure the sample with phosphate, KCl and LaCl, C2H2-N2O flame give false positive result, around 0.5ppm. When i measure the sample with phosphste, KCl and EDTA. C2H2-N2O flame also give 0.5ppm false positive. But both above mentioned sample would not give false positive when measured by C2H2-air flame. What is the reason?
what parameters we will consider while developing a HPLC method and how we confirm our HPLC method is valid?
Ratio of Water and Acetonitrile(diluent) is not recommended to use in cleaning method validation,why?
Why six unit used for precision?
in OSD forms require to use gas chromatography?
some product having water content method with pyridine and ethylene glycol mixture instead of methanol? how they are selecting and methanol is not suitable solvent how ?
