Interested to Buy Any Domain ? << Click Here >> for more details...
the question is about buchloz relay
why we called it buchloz relay
- 7 Answers
- 14873 Views
- HIL, I also Faced
- E-Mail Answers
Answer Posted / anandh
The Buckoltz Relay Developed By Mr.Max Buckoltz at 1921.And it is the good preventer in transformer at all faults
It will give the alarm at slow developing fault and it separate the transformer from load at the severe internal faults.
| Is This Answer Correct ? | 7 Yes | 2 No |
Post New Answer View All Answers
how to read idmt curva
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
Plz tell me how we can find that particular company has vacancy or not
what is the meaning of neutral displacement ???
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
What are the difference between normal application Transformer and Solar application Transformer?
What is the requirement of grounding the neutral of single phase generators on load? If the neutral is not grounded, what will be the effect?
What are the types of windings according to the construction?
volts=230 c=10mf a=??
While performing stability test of differintial cts how to know the voltage and current on both side of the transformer?
pls tel me the electric train traction motors name plate details like rpm,torue,voltage,amps,watts..ect..
What type of a DC motor would you use for a lift?
given data are load current & power factor cable core size? plz any one update the calculation formula
How to findout raw or ups power? its not indicated in socket,
How can a equal potential zone be carried out in conductors?
