what is ifference between PFR ,MFR and batch reactor?
- 9 Answers
- 57053 Views
- BARC, IOCL, I also Faced
- E-Mail Answers
Answer Posted / ravishankarraju
Pfr is continuos reactor wher the flow is plug flow wher there will concentration change along the length of the flow and in mfr there will be mixing all over the reactor which is similar to batch reactor but mfri in mfr the concentration drops suddenly
| Is This Answer Correct ? | 6 Yes | 9 No |
Post New Answer View All Answers
marketing procedure of iocl
How much maximum power can be generated by 320v, 10kg-cm synchronous motor if shaft is rotated mechanically at 50 to 60 rpm?
Where barrel pump use?
What is the method of determining maximum differential pressure during hydro testing of shell and tube heat exchangers?
For a heat exchanger, will the overall heat transfer coefficient increase along with an increase in lmtd (log mean temperature difference) around the unit?
Re: Sugar Cane Bagasse What are the 1. Specific Heat of Bagasse at 50% moisture, 40% moisture and 25% moisture? 2. What is bu;lk density of bagasse at 50% moisture, 40% moisture and 25% moisture? 3. What is specific gravity of bagasse at 50% moisture, 40% moisture and 25% moisture? 4. What is the specific heat of flue gases generated from boiler fuelled by bagasse? 5. What is the specific gravity of flue gases generated from boiler fuelled by bagasse?
What is the most common cause of solid size segregation in bulk solid systems?
Dear guys we adding hypo at climax plant and that water is inlet to DM plant so with hypo water that can affect my resins of cation and anion. if it is affect life of my anion and cation so what kind of steps should be take.
How can I treat a waste stream containing both hexavalent chromium and arsenic?
MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)
Explain what are the disadvantages of using gear pumps?
What are the disadvantages of using gear pumps?
Calculate the line size for a cooling water line with a volumetric flowrate of 1200m3/h of water. Density of water = 1000kg/m3
How can you control the ph level in our cooling water with respect to ammonia contamination?
Mention some of the specialized crushing methods?
