Interested to Buy Any Domain ? << Click Here >> for more details...
What is RTCC panel and why it is required
- 31 Answers
- 136552 Views
- RTCC, Tivoli Grand, I also Faced
- E-Mail Answers
Answer Posted / nata
RTCC means Remote Tap-Changer Control. The function of RTCC
is to maintain the voltage in the transformer via OLTC. If
there's change in the load, like more current inject,hence
the voltage decrease, so RTCC will change the voltage to its
normal operating position by change the tap position. when
the current become stable, it will tap to normal position
like before. the tap itself function as to lower or raise
the voltage so that it can be maintained.
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
How to calculat the ratio of HT\LT in energy meter
Where is servomechanism used?
Anyone who can recommend an equivalent to Envirotemp FR3 of Cooper?
The slip during plugging operation is given by= A 1-s B 2+s C 1+s D 2-s
Dear friends, i would like to know that what is the exact function of 'exciter winding' & 'aux winding' in Alternator?
What are the two segments of nyquist contour.
ROC converges if poles and zeros lie inside a. Origion b. Z=1
What are the Full Forms of TVM, MTL, CVT ?
why do we need to use 3c+3e cable, normally i select only 3c+e cable and i think it is enough. pls explain the usefull of 3e cable ( in this project the earthing system is well done)
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
Does magnetomonopoles exists? one maxwell equation strongly suggests no, but how about their existance in plasma?
Draw the equivalent circuit of crystal oscillator?
1. If 8.35%Z means the percentage impedance of 132kV-line from power company, we will like to reconfirm its base capacity.
A 10 MVA, 66KV, 50Hz, Y-connected 3-phase alternator has synchronous reactance of 0.635 Ù. It is working at full load at 0.8 lagging p.f. condition. Find torque angle, neglect armature resistance.
what are the interview question asked in wind mill about electrical
