Interested to Buy Any Domain ? << Click Here >> for more details...
What are the types of membranes used in RO water treatement
plant?
- 2 Answers
- 8935 Views
- I also Faced
- E-Mail Answers
Answer Posted / pushpalatha. t
polyamide, spiralwounded and cellulose acetate are the membranes used in the RO water treatment plant. mostly poly amide membranes are used because there is minimum amount of rejection occurs.
| Is This Answer Correct ? | 19 Yes | 5 No |
Post New Answer View All Answers
Dear sir/madam I am in final year BE chemical engineering.Which companies i can apply .Please guide me.It is very helpful for me
What are the problems that are associated with the expansion joints?
Explain the some guidelines for sizing a psv for a fire scenario on a vessel in a refinery service?
MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)
Is there any way to repair a valve that is passing leaking internally without taking our process offline?
Can condensate control in a reboiler cause water hammer problems?
What are advantages using hollow shaft impeller?
Define pcbs?
how much maximum power can be generated by 320v, 10kg-cm synchronus motor if shaft is roteted mechanically at 50 to 60 rpm?
What chemical is used to expand air bags in such a short amount of time?
Are there any general rules that should be considered when designing a slurry piping system?
What type of pump may be appropriate for a liquid near saturation, a low flow rate, and very limited npsha?
What is the wet bulb globe temperature (wbgt)?
What are the strategies acquired to cure tube vibration and exchangers in a shell?
Jspl question paper for freshers requirements chemical engineering diploma
