Answer Posted / lokanatha reddy.r

fe250,fe415 and fe500

1.Fe500 and Fe550 having more yield strength than Fe415.But why are we prefering Fe415.? 2. d^2/162 formula for knowing the steel wt/m apply all these three? Thanks.

3302

---

If 40 backlogs are cleared m finally with 65 percent marks . Am I eligible to get visa to US

1715

---

Why are steel plates inserted inside bearings in elastomeric bearings?

1154

---

How to calculate the crank rod in slab

2423

---

What is the difference between Grade I, II and III of GSB?

2639

---

Can we use Polystyrene as a Bitumen modifier !! if so is it a good MS research topic ? and what type of laboratory tests will be conducted during Research work ??

2237

---

How is the strength of cement measured?

1172

---

What is the requirement for over all CG of DG from the foundation surface to absorb the vibration of heavy set.

2071

---

column at edge of a framed structure is uniaxial or biaxial. and is an interior column is biaxial

3927

---

material used for mendrel use to bend epoxy coated rebar

2286

---

A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals

2239

---

what is the quantity of block work required to construct a compound wall of 6" thick,and 212 lenght

1427

---

what is total volume of ingredients used in concrete accordingly

2230

---

Can anybody help by describing each and every step in short, used while giving a building layout by total station? Regards

2015

---

what is meant by sustainable developement as far construction field is considered. Give suitable examples to explain the same

2212

---