Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / monty_007
mass flow meter is a one type of instrument for measring a
liquid how much pass
| Is This Answer Correct ? | 7 Yes | 10 No |
Post New Answer View All Answers
What is the difference between modbus,fieldbus & profibus
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
WHY THE DEGREE OF VALVE PLUG AND VALVE SEAT IS SLIGTLY DIFFERENT I CONTROL VALVE TRIM DESIGN
what does the ratio 800-400-300-200/1-1-1-1-1 in the specification of current transformer indicates?
What is the difference between conductive lined pipe and conductive unlined pipe? Why do we see that?
Pl send the model question paper of mahagenco account officer post
In VVVF DRIVES VOLTAGE IS ALSO VARY WITH THE FREQUENCY. HOW? WHAT IS THE DIRECT FORMULA RELATING THESE TWO.
For what reason would you possibly be compelled to make use of a Smith Predictor. Explain the idea behind the operation of this device.
What is modbus?
Explain types of valves?
What is difference between differential pressure & delta pressure?
State bernoulli’s application.
what is the field bus calble ? what are diffrences in orang colur cable and black coular calble ?
POSSITIVE PULSE IS APPLIED TO AN INVERTER INPUT.THE TIME FROM THE LEADING EDGE OF THE INPUT TO THE LEADING EDGE OF THE OUTPUT IS 10 ns. THE TIME FROM THE TRAILING EDGE OF THE INPUT TO THE TRYLING EDGE OF THE OUTPUT IS 8 ns. WHAT ARE THE VALUES OF tPLH and tPHL?
if my flow is 20000 m3/h than which range of DPT i have to use????
