Answer Posted / ponnu
agarthala
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
How to test lightning Arrester?
Will any motor burn if voltage provided is lesser than the rated voltage???? If yes, then how is speed control possible with voltage control
Is there chopping current in resistive circuit
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
Why armature rheostat is kept in maximum position?
A mass of 1200g is accelerated at 200 cm/s2by a force. The value of the force required is:(a) 2.4N(b) 2400N(c) 240 kN(d) 0.24N
I have a relay contact rated at 220v dc which is supplied with a 24vdc from the panel,for it to trip the dampers(24vdc).What if the application of the relay changes so that it should work at its rated 220vdc then will it work at 24vdc supply given or any other consideration needs to be taken .....
we have 15 ampere variyac but we want 30 ampere variyac what we do
WHAT IS MEANING OF Gg & Gg IN hrc FUSE
How to calculate pitch, gauge of winding wire, and No. of turns for 30HP, 3 phase, 4 poles 50Hz, 380V induction motors
How to select transmission line type (i.e. 11kv or 33kv) for new established industries
why motor range is available 22kv,30kv,37kv,45kv and so on? why motor range is not available 21kv,24,25,26,27kv and so on?
in a solar power plant,we are going to step up the voltage 350V to 33kv, and to 132kv GSS. i want to ask that if it is possible that 315v/33kv is not possible because we also use 315v/11kv. or it should be 415v/33kv? is it effects generation or losses? the second question is-generation is depends on LV winding? or LV winding design for generation voltage?
which is better to use svc or synchronous condenser why ?
how to select proper cable for ct wiring so that drop within the limit.
