Interested to Buy Any Domain ? << Click Here >> for more details...
what are the various types of earthing? plz give brief
detail of all. also post pictures if u have.
- 22 Answers
- 47541 Views
- Aster Teleservices, Era Infra Engineering, Micron Electricals, I also Faced
- E-Mail Answers
Answer Posted / aleem khan
AS PER THE IEC STANDARDS THERE ARE 3 TYPES OF EARTHINGS.
1. TT SYSTEM
2.TN-C OR TN-S SYSTEM
3.IT SYSTEM
FIRST LETTER : EARTHING ARRANGEMENT AT THE SOURCE OF THE ENERGY.
T- DIRECT CONNECTION OF THE NEUTRAL POINT TO THE EARTH.
I- NEUTRAL POINT IS ISOLATED FROM THE EARTH OR IT WILL
CONNECT THROUGH AN IMPEDANCE.
SECOND LETTER : EARTHING ARRANGEMENT FOR THE EXPOSED
CONDUCTIVE PARTS OF THE INSTALLATIONS
T- DIRECT ELECTRICAL CONNECTION OF THE EXPOSED CONDUCTIVE
PARTS OF THE INSTALLATION TO THE EARTH ELECTRODES
INDEPENDENT OF THE EARTH ELECTRODES OF THE NEUTRAL AT THE
SOURCE.
N- DIRECT ELECTRICAL CONNECTION OF THE EXPOSED CONDUCTIVE
PARTS TO THE EARTHED NEUTRAL ELECTRODES AT THE SOURCE.
THIRD LETTER: ARRANGEMENT OF EARTHING FOR NEUTRAL AND
PROTECTIVE FUNCTIONS.
C- NEUTRAL AND PROTECTIVE FUNCTIONS ARE COMBINED IN SINGLE
CONDUCTOR.
S- NEUTRAL AND PROTECTIVE FUNCTIONS ARE SEPERATE CONDUCTORS
T- NEUTRAL CONNECTION IS
| Is This Answer Correct ? | 0 Yes | 3 No |
Post New Answer View All Answers
Give some differences between open loop and closed loop control systems.
what is vtg limit of earth and neutral at transformer side?
at work we have a 3 phase motor but on testing one phase isnt getting a reading. it runs 24 hours a day all week. stops and starts well no noise or heating. the phase isnt down to earth.is it just a bad meter reading or not? phases one and three came up with a resistance reading of 0.4 but phase 2 couldnt get anything shows up as open circuit.
What is ramp signal?
Why the efficiency of generator is more than motor in swinburne's test
WHY IL=IPH IN STAR AND WHY IPH=IL/1.732 IN DELTA? WHAT IS REASON BEHIND IT?
In TNC switch, is there any 1NO+1NC block ? and if we move over closing position, is ther any affect on trip position or vice versa?
What will happend if given Vfd out put to step up transformer
what is the difference between the characteristics of two different phase bushing of any transformer
What is the effect of interchanging core(made of steel) and winding(made of copper) material in case of transformer? Give proper explanation in regard to different losses in transformer.
Electrical Engineering
sir please tel me how calucalte kwh if home taken load 30ams how maney kwh taken per day.and 3phase motor 5hp per hars how maney load teken and how mach kwh and forward me to electrical table for calicalte kwh and kvr and kvah
How to calculate the input cable rating for 10kva ups (3phase input and single phase output and also 3phase output, battery rating 65Ah)provide the formula also.thnx
Why colled 440V to 3-phase supply.
5- What is the task (function) of the excitation and isolation transformers in power plant? 6- What is the task (function) of LCI (A), LCI (B) and LCI (COS) in power plant? : LCI (A) and LCI(B) are load commutating inverter for generator turbine starting. , LCI (COS) is load commutating inverter change over switch
