Interested to Buy Any Domain ? << Click Here >> for more details...
wat is the importance of reactive power in power
generation.....if it is zero means wat will happen to
system........
- 22 Answers
- 43018 Views
- Bhel, Jindal, I also Faced
- E-Mail Answers
Answer Posted / vivek gohane
what ever be the power generated by the generator, that is
used by the consumers i. e.lighting loads,ind.motors,arc
furnaces and all these loads works on lagging power factor
so if it is zero means no reactive power flow ie.load
didn't get reactive power so it will not run or work
satisfactorily. 1) if we think about gen,then it is under
excited condition for generator so terminal voltage of
generator will decrease and current will increase.2)we know
all the generator are connected together with grid if
reactive power flow of any one generator become zero then
it has adverse effect on other generators,resulting in
power loss,heating effect and many more.
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
What is PEC??Applications........
As a electrical engineer.. what are the basic norms should follow in transformer oil testing.. 1.What is the Electrode type? 2.How long time you will give for oil testing?
I am abt to give IOCL intrv.Plz sir guide me for IOCL intrvw (Electrical).Which subject to be consider. questions are generally asked from which subject.Plz help me out.
I have doubt that the supply HZ (very low or high than rated ) may affect the power factor. is it true. ?
what is the meaning of number in (11, 31, 61,14, etc. CDG11, CDG31, CDG61, DDT32
Could the power factor on electrical system can affect the registration of the kwhr meter or the CT/PT?
What is the size of a 60 watt and 80 watt tubelight?
11000volt DG set carnt kaise banvay
What is the purpose of stablization resistor in high impedance bus bar protection
In EHV transmission line a neutral grounding reactor is often placed at neutral point of shunt reactors. What is the recommended protection for this neutral grounding reactor? Should I use a fast closing switch to bypass neutral grounding reactor when this protection operates?
What is Primary And Secondary Injection Test of Relay and Other Electrical Devices. How IT is carried out.
how to find out 3 phase complex power in per unit in unbalanced system?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
I want definition for ABT Meter (Availability Based tariff) ?
Write the force balance equation of ideal spring element.
