Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / www.islamqa.com
# PLC is first invented and developed to be used with
discrete - on/off control & with small scale applications.
# DCS is designed and fabricated to handle modulating/PID
control applications & to serve in large scale I/Os
applications.
# with great progress and achievements in plc h/w and
networking technologies we have PID algorithms with PLC and
also plc become able to handle wide range of I/O'S like
DCS, actually with good engineering the one can build his
own DCS with multible PLCs.
# But actually with great engineering to build the DCS from
multible PLCs it will not be the same as pre-built/ready to
use DCS system in its functionality and its features.
# DCS is pre-fabricated system with compatible, integrated,
and tested H/W & S/W - has the following features:
- data collection & management.
- event and history management.
- instrument management.
- alarms management.
- smart and self diagnostics.
- advanced control strategy and easy to build, configure
control loops.
- redundancy.
Regards,
Ahmed Sabry
Control and Instrumentation Engineer
GPC - General Petroleum Company
ahmedsabry.online@gmail.com
CELL.: 00 2 0121367310
| Is This Answer Correct ? | 4 Yes | 3 No |
Post New Answer View All Answers
What is motion balance principle?
why direct mounted pressure transmitters is always installed with DBB ( double bleed block) valve in process line or top of the tanks ?
Draw bode plot of any transfer function. Why is plotting bode necessary?
What is the GK Value in Flowmeter?
I have energy meter for educational project having 0.5s class but my friend need 0.2s class meter , which one is good for that purpose and what is the actual difference of that two classes , need very easy example also.??
How to work temperature gauge?
Explain about safety integrated level protection? . How it was differ from other protections ?
Calibration of controller (pneumatic)
Pl send the model question paper of mahagenco account officer post
Which tank weighing system is better to install (Accuracy point of view) 1) Tank weighing system with 3 load cell or 2) Tank weighing system with 4 Load cell
Calculate the maximum pressure drop that can be allowed to occur across a control valve, so that we can prevent cavitation / flashing from occurring. Use the following formula: Δ P allow = Km (P1 – PvapourA) where, Δ P allow - the maximum allowable differential pressure for sizing purposes, or terminal pressure drop; Km- the valve recovery coefficient from the manufacturer’s catalogue; P1 - absolute inlet fluid pressure; PvapourA - absolute fluid vapour pressure at the inlet temperature; Use Atmospheric pressure = 101.3 kPa, P1 = 1200 kPa(g), PvapourA = 4 kPa, KM = 0.72
1.what is the effect of vapour presuure in orifice plate flow measurement 2.which is more effective 2 pressure sensors or one single differential pressure sensor in orifice plate measurement 3.how to design a v/i converter and i/v converter 4.how many type of thermocouple are there 5.how many leads are there in thermocouple measurement 6.how pressure sensors are connected in level measurement in differential pressure method 7.what is the output of capacitive pressure sensor (ac or dc),how its o/p is signal charactarized 8.what is the physical meaning of discharge coeeficient,why it is calculated,orifice plate what is its value,why it is less than 1,Q at upstream is equal to or not equal to Q at downstream of orifice plate why?what is vena contracta in orifice plate 9.why rotameter is called variable area flowmeter,it can measure flow even if area is not varying,why it is made tapered 10.design a 10 bit counter ,which counter you will prefer 11.how to remove self heating error in RTD 12.which is more sensitive pt100 or pt50 13.why thermocouple are connected in parallel 14.what is lead contact error in RTD,how to avoid 15.what is P,PI,PID,PD controller,why there is no ID controller 16.what is override,split range,sequential,ratio,feedforward,cascade controller 17.why we moved from SR to JK and then JK to master slave JK flipflop,give correct reason 18.how to measure level of a closed container which contains vapour and liquid,remember no vapour gas should be leaked,so ultrasonic and capacitive is not an option,design another method 19.how to design horse race counter including sensors and signal conditioning element 20.what is bevelling
detail of mass flow meter pricipal
How is work 5/2 sov?
WHY THE DEGREE OF VALVE PLUG AND VALVE SEAT IS SLIGTLY DIFFERENT I CONTROL VALVE TRIM DESIGN
