Interested to Buy Any Domain ? << Click Here >> for more details...
can anybody give me current carrying capacity of cables
e.g size of cable in sq.mm & its current capacity
both alluminum & for copper
- 4 Answers
- 7367 Views
- I also Faced
- E-Mail Answers
Answer Posted / saju
1.2A/sq mm for CU
.8A/sq mm for AL
| Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
i have a 1500kVA transformer what is the kWH meter i need to use?
Why choke coil is connected in series with starter in tubelight??why starter is connected in parallel to tubelight??
to hook up ten 50 amp rv pedastels at a lenth of 600 feet from the service what size will my service need to be and the size of wire will I have to run to each pedastel in series??????
What Is Connection APFC Panel In Compony.
If a 3 phase induction motor is in off condition in the conveyor and rotor of the motor keeps moving with the conveyor than the resistance of windings of motor varies. why is it so ??
Application Comparison between 22KV (UE)and 33KV (E) system. Are we allowed to use 33KV (E) cable in lieu of 22KV (UE) cable. What are the technical disadvantages.
What are operating procudures & Safety precautions to be observed while operating OLTC in manual mode ?
what is the use of the puls transformer in UPS & how it works???????????
how to carry out Magnetizing Current Test on Distribution transformer and what purpose we are doing this test. why transformer rating in always in KVA ? what ispositive, negative, zero sequence impedence? How ElCB tripping if Neutral touch with ground Why AC & DC capacitor are use in UPS ? why motor rating in KW? how to syncronize two dg sets
how to select proper cable for ct wiring so that drop within the limit.
how you taken aotitude test
How to set the relay,,??
In our plant we have installed new MCC with ELR and CBCT which is detecting some leakage current in the system but it leading to some confusion when to check that in which feeder which is drawing current we put off the whole panel itself but still CBCT detecting some leakage current so can anybody ans me , where i am going wrong or how to detect whether its actual leakage or CBCT malfunctioning.
how to setting voltage RTCC panel
What is the basic principle of welding process?
