Interested to Buy Any Domain ? << Click Here >> for more details...
1.what is surge
2.what is lightning
3.what is switching
4.difference between surge,lightning,switching used in
power system
4.definition of surgearrestor,lightningarrestor
5.adv and disadv of surgearrestor,lightningarrestor
6.uses and purpose of surgearrestorand lightning arrestor
7.block dia of surge arrestor
8.blockdiagram of lightning arrestor
9.operation and working of surge arrestor and lightning
arrestor
10.basic formula of surgearrestor and lightning arrestor
11.basic diagram of surge arrestor and lightning arrestor
- 1 Answers
- 6319 Views
- Crompton Greaves, Framo, L&T, I also Faced
- E-Mail Answers
Answer Posted / senthilkumar.jaipur
technical question -powersystem and switchgearand protection
| Is This Answer Correct ? | 9 Yes | 3 No |
Post New Answer View All Answers
What is Phase margin?
1. What is differential relay? How it operates? 2.How to calculate the Short Circuit Impedance in Transformer? 3.What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works? 4. While testing the 33KV Busbar by using Hipot kit, what should be the test voltage we have to apply? 5. What is the procedure/activities to be taken to inject the current more than 2000A by using 2000A Loading Transformer? 6. Explain how you can give the overload setting to any Motor Protection Relay for a HT motors with formula and example? 7. Why restricted earth fault protection is needed? Why can’t differential Protection is sufficient? 8. What should be the minimum and maximum ohmic value for earthing? 9. Why DC Currents are not used in transformer? 10. What is the Frequency while we step up the voltage from 220V to 11KV? Is it possible? Explain it?
What are the causes of having an rmu explode after installation? And how do u treat the bushings of an rmu?
if the armature current in a dc generator is ac ( sinusoidal ) why doesnt the sjhape af armature mmf a sinusoidal (ni) ? armature mmf in case of a dc machine is triangular.
how we decide scurt (disc) of insulator with respect to kv rating
if a 3phase 100kva distribution transformer , 400 v,50 hz, 4-wire system is loaded at 160 k.w mostly 1-phase Lighting & Airconditioning split a.c load what will be the net effect on the power system in terms of voltage, powerfactor, current , efficiency of xformer
what is protection class current transformer.
Could you measure voltage in series?
why burdens of VTs is more than CTs?
Why we use 4-20 mA Analog signal for the PLC input? Why not 0-20 mA? Why not 5-25 mA?
A system absorbs 100 k J of heat and the increase in its internal energy is 100 kJ; the work done is
how we can adjust for three phase motor cold stall time ,hot stall time and thermal register set up?
How many turns are there in primary winding? (In Transformer)
How many kinds of E.L.C.B and how to work E.L.C.B
some time we open engine breaker 8.0 MW load but plant not trip. and another time engine open 4.0 MW load engine trip why? individually engine breaker open & individually emergency stop why difference?
