Interested to Buy Any Domain ? << Click Here >> for more details...
how we can know which is Lv side and HV side of transformer
by just seeing it?
- 7 Answers
- 25234 Views
- I also Faced
- E-Mail Answers
Answer Posted / nithi
for a distribution transformer(22 kv or 11kv/440v),there is
a bushing in the HV side whereas LV side doesn't has.
in a small transformer (used in radio,tv....),the
size of the lv side winding (conductor size)is slightly
bigger than the HV side winding.
Also,HV winding is always wounded over the LV
winding.
| Is This Answer Correct ? | 21 Yes | 4 No |
Post New Answer View All Answers
what r the checklist while installing a 380 kva DG set
Is electro plating what type of load whether resistive, inductive or capacitive loads
Mention what are the types of semi-conductors?
can you send me the placement papers of electrical engg. from companis like NTPC,DRDO,IOCL,HPCL,BPCL etc.?If,plz send as soon as possible.Thanks.
2. Modify your design in question 1.a so that the circuit works according to the following function table X Y F 0 0 Clear 0 1 No Change 1 0 Parallel Loading 1 1 Count 3. Design a circuit that detects the pattern 010 in a serial input X considering: 3.a Overlapping 3.b No overlapping
How to use earthing on shipments.
What happens if we connect a single phase energy meter in reverse polarity.
Can a generator runs after getting 1st stator earth fault.
R=*ΒΆ l/a
what is the standard duration after failure EB power
why the perameters of secondary circuit are more important then that of the primary circuit of induction motor?
why magnet has north and south poles only why not east and west and why we are considering as north and south poles? why cant we consider as east and west?
why +24 v and -48 v give to BTS? If -48v protect from surge then why we not use -24 v?
In Electrical 'Single Line Diagram' cable nomenclature shows "2 X 1C X 630sq.mm to be provided for one incomer. The question is how many cable to be proved for one Incomer.
raleigh method
