Interested to Buy Any Domain ? << Click Here >> for more details...
how we can know which is Lv side and HV side of transformer
by just seeing it?
- 7 Answers
- 25462 Views
- I also Faced
- E-Mail Answers
Answer Posted / bala_vlsi
you can easily find out 1U 1V 1W - This is HT side and 2U
2V 2W this LV side
| Is This Answer Correct ? | 23 Yes | 5 No |
Post New Answer View All Answers
Explain the operation principle, advantages and disadvantages of the following converters: a) A 12 pulse converter b) A Switch-mode inverter c) A thyristor inverter
what are the advantage and dis-advantage of 3 phase 4 wire energy meter?
What do you mean by screen of power cables?
Is a contactor (or master relay) required between incoming lines and a VFD? The question goes to safety. If a contactor were used before the VFD and an e-stop engaged then the motor will coast to a stop (i.e. VFD loses power) instead of stopping much faster if the VFD braking fucntion were used. It would make more sense to keep power on the VFD.
What should be the percentage increase in length of the dead end clamp for bus bar conductor (Hawthorn) after hydraulic pressing and what should be the applied pressure?
What is routh hurwitz stability criterion?
how to calculate the magnetizing current of ct ( 800A/1A) for Relay 64
Which type of questions well asked. ?
defult setting in p220 micom motor proction relay for 11kv,640kw,f.l.a.-40a,1440rpm ht motor?
What should be the Sandwitch type Al. bus bar capacity for 2 M.W.Gen. set, having continuous full load current- 3463 Amps,ambient temp.- 50 Deg. C., Required temp. raise-20 deg.C., it will run 24 hrs, 365 days on full load, required highly reliable.
In the N-series schneider reclosers. What is the difference between current during fault time and current at tripping? This appears in the Event log in an event of a trip out.
kVA rating of ordinary transformer is increased when connected as an auto transformer because A transformation ratio increased B secondary voltage increased C energy is transferred both inductively and conductively D secondary current increased
why we are not giving the zone 1 trip command to the master trip relay
what is the responsibility of C license holder in industry?
what kinds of Transformer oil grade is better for power transformer ?
