Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / santosh
circuit breaker is used to isolate the circuit from main circuit when relay give signal to circuit breaker when fault accure
| Is This Answer Correct ? | 2 Yes | 4 No |
Post New Answer View All Answers
What is the difference between line drop and percentage line drop?
Logic using 1 kV or 1,1 kV grade in house wiring Low voltage cable. Explain/suggest? some use 1kV and some prefer 1.1kV grade insulation low voltage cable why??
What it the purpose of parallel phasing transfomers??
How halogen & merquery lamp works.
Why use the vcb at high transmission system ? Why can’t use acb?
Sate maximum power transfer theorem?
how to find the resistance and gap volatage of the diode??
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
Determine the BTU size of an aircon for 20 sq metre room
If a shunt Dynamo has induced emf 100V and 0.4 ohm resistance and battery of accumulator of open circuit emf 110V and 0.5 Ohm resistance are in parallel what is common terminal potential difference?
what size steel armoured cable is required to support 1500kva capacity. would 70mm squared be enough or would I need 90 or 120mm squared 3c plus earth
What are the advantages of speed control using thyristor?
Why do not we prefer non conventional sources of energy to conventional sources?
do any one help me to get "C" license,, i have doubts ,,, if mediators ter pls call me,, my no is 8056640042
we have a 2.5hp Starite electric motor water pump,the elec motor burned out,we need to replace starting capacitor(old capacitor specs erased),what microfarad rating capacitor do we need? 110-125V
