Answer Posted / henry chijoke
the strain energy of a conservative system is
expressed in terms of displacement degree of
freedom. 2nd theorem: partial derivative of the
complimentary strain energy wrt load yields the
displacement component of the loaded point.
Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
in staad pro. modelling for a parallel scissors chord truss, when i assigned roller support i.e fixwd but with all Fx, FZ, Mx, My and Mz release except Fy... the analysis results " in stability at a joint, with direction Mx or My..what could be the reason...anyone please explaing
What are the advantages of cad software’s?
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
What is .Dwg?
How to calculate cement and river sand material Qty for waterproofing base coat and finish coat
What is M40 _ TOR - EQ and B.F.S
Define What is the tensile strength of wood?
what is meant by shear center?????
how we calculate the vol.of wet concrete..?
five benefits of using standard terminology in the measurement process
2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32
Can anybody help by describing each and every step in short, used while giving a building layout by total station? Regards
Hollow block masonry in cement mortar 1:4, 40×20×20cms in superstructure take 10sqm.I want calculation of brick sand
How reactor of SBR installed , is it be over ground, fully under ground or semi sunk ?
What things you need to take care of before building a kitchen island?