Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / randy
Email:oiltester@yahoo.cn
Manual of Transformer Oil Tester
1. Introduction:
IIJ-II Transformer Oil Tester is produced by our company,
which adopts industrial single plate integrated circuit,
new-style I/O jack, with unique inspection and anti-jamming
technology to greatly improve its reliability and
functionality.
Main features:
1. Easy operation, high autoimmunization (only press
button once and all work done automatically)
2. Menu management, data input simple and convenient
3. It can store 99 data of oil sampling tests, the
test data can be reviewed and printed in 100 years even
after power is off.
4. The clock in going on after power off.
5. The software can be upgrade through RS232 terminal.
6. Strong anti-jamming, high precision testing.
7. Small measurement, light weight, and convenient for
outdoor operation.
2. Technical parameter
1. Power supply: AC220V ±10%, 50Hz
2. Output voltage: 80kV, 100kV
3. Capacity: 1.6kVA, 2.0kVA
4. Speed of voltage increase: about 2kV/S
5. Voltage inspection accuracy: 1%
6. Breakdown sensitivity: <0.1kV
7. Waveform distortion: ≤3%
8. Breakdown response time: ≤ms
9. Working environment: temperature: 0C~40C,
humidity: max relative humidity 85%
10. Storage environment: temperature: －20C ~ 60C,
humidity: max relative humidity 75%
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
what is cathodic protaction?
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
why do you add the load short circuit impedance when considering short circuit amperage. It seems that you should only consider supply. If you need to consider loads and you don't know what loads are to be added , what would be a good sub-transient reactance rating for the loads?
How to decide whether A / B / C / D curve type MCB should be used?
how to find impedance , mutual indatnce in transmission lines
State thevenintheorem?
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
What are two contours of nichols chart?
I had applied for JE in PSEB, Can you pls send me the Question bank for related to my field
how much flux density of CRNO core
What is the lockout relay
details of oil cell size of Breakdown voltage test of tranformer oil details as per Standardswith mushroom electrodes?
How generator NPS(NEGATIVE PHASE SEQUENCE TEST)TEST WAS DONE? PROCEDURE WITH DETAILS?
A 400KVA transformer has 400 Hz frequency. If the frequency is changed to 50 Hz, then what will be the new KVA rating?
why ht cable end termination don't have a gland?
