Interested to Buy Any Domain ? << Click Here >> for more details...
why do you desire to change from your current position?
- 1 Answers
- 5533 Views
- I also Faced
- E-Mail Answers
Answer Posted / suresh
due to my experience i welcome my career risk or development
| Is This Answer Correct ? | 4 Yes | 3 No |
Post New Answer View All Answers
Describe the sections included in a typical bill of quantities
Design a reinforced concrete combined footing (rectangular) for two columns located 3.60 metres apart. The overall sizes of the columns are 40cm x 40cm and 69cm x 60cm and the loads on them are 1000 kn and 1500 kn respectively. The space available for the width of the footing is restricted to 180cm. The S.B.C. of the soil is 280 kn/mm2 use M15 concrete.
How to testing voids of filled aggregate in bitumen mix design
How do we calculate absolute pressure?
load combinations how many types for staad design purpose?
What materials were used to build the golden gate bridge?
a concrete mix 1 2 4 by volume with water cement ratio as .6 by weight if moisture content in F.A is 6% with 20% BULKING AND IN C.A 1.5% by volume. find quantities of different materials required for one bag of cement
What in your opinion makes you the most suitably qualified candidate for this post of civil engineering technician?
How to calculate quantity of cement , sand and granite from concrete mix ratio and volume of work
What is Heavy Concrete & Normal Concrete
Explain what is progress payment?
I have certain queries, please help to solve. a) length of pile bore is 4m.excavation quantity will be area * length where area will be pi/4 * dia*dia. Is this right? b) It is a single reamed pile of 300m dia and reamed dia is 750mm. can any body help me to calculate excavated quantity of this bulb(reamed section),, concrete quantity in bulb with showing the formulas to be used?
how to calculate the rebar depth if forgot the foundation reinforcement (main steel)? is that any calculation or formula we have data sheet of supplier what depth what is the pull out capacity is mensioned in data sheet. if any IS code than its help full to me.
1.what type of the rock is most suitable for wet mix macadam in construction of road? 2.what is the highest maximum dry density and optimum moisture content can be acheive by using most suitable crush rock?
2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32
