can we use .5 water-cement ratio for any type of cement?
- 7 Answers
- 9377 Views
- I also Faced
- E-Mail Answers
Answer Posted / suresh
water cement ratio means weight of water /weight of
cement.the allowable ratio is between 0.4 to 0.6.so we can
use 0.5 w/c for any type of cement.
| Is This Answer Correct ? | 10 Yes | 2 No |
Post New Answer View All Answers
what does the track parameter mean in staad.pro?
How to calculate plastering for elevated water storage tank
what is meaning of inverted beam.is it way to provide double mat in slab one at bottom and another at topif we go for provision of inverted beam. shall we construct structure with out plinth beam for us we have to construct small bus shelter
TELL ME THE EQUATION FOR OGEE SPILLWAY
hoe much fine & sourse agregate required for concrete mix of 1: 1.5:3 by volume in Cu.Ft
Which stone is best for wall construction Laterite Stone or Cement Blocks
what is the most suitable foundation when construct a bird watching tower in a marshy land
What is the Hardness of M-40 grade concrete, general and theoratical
What is the frequency of sampling for the materials of cement,Fine aggregate, Coarse aggregate .and refer which code
in the earthquqke the profile of water on dam is parabolic or not
how we can find sieve #4 is 4.75mm?
which software is better for design and analysis of buildings (stadd pro ) or (Etabs)
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
How to find weight of steel in kg if we know the area which is in m2? Following details are known to us, Area=125m² thk of slab=250mm Steel details:T12@200 PS:considering mesh top and bottom with X and Y direction
what are the challenges of being a team leader and a supervisor?
