Interested to Buy Any Domain ? << Click Here >> for more details...
When batteries are connected in series the voltage increases
but the current remains unchanged, how can this be?
When you consider ohm's law. i.e.
If voltage increases, current increases, providing
resistance remains the same.
- 10 Answers
- 13034 Views
- I also Faced
- E-Mail Answers
Answer Posted / vinamra
as we know that battery are voltage source,so whenever we
will connect the voltage source in series then the
resultant voltage will be addition of that sources,but
current is depend upon the load so in this case current
will not increase but the ampear hour capacity will be
increase
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
for what purpose the star point is done in ct
how we do Vector group ,magnetic balance and tap changer test in Transformer?
Is the installation of the filter cloths necessary before spreading the gravels at the transformer yards?
at what base you will tell the direction of rotation of dc motors and generators?
how to minimize earth resistance upto 2Ω, if the resistance is 6 Ω ?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
What is error of a measurement?
hello friends.. I have a doubt regarding the operation of dc machines.. I studied in a text book that a dc machine can be used as a generator and as a motor.. is this possible? If so,please send me the info about this topic.. you can also send your info to my mail.
I have made a 3 phase thyristor full bridge rectifier. But at the moment it is working only for the half bridge operation. Both the half bridges are on operation separately but when i put it into full bridge operation the oscilloscope output is zero. I rechecked that the pulses are correct for each thyristor. what could be the possible reason for this?
how a.c. genarator control power factor when its conected to grid supply by incrising or decresing excitation voltage.
What is the rating factor for copper cable ( Specific value according to the type of laying ) & the voltage drop?
hi, i have 3x200KVA and 2 x 80KVA UPS with battery bank of 150AH 68Nos. and 100AH 204Nos., i need to install AC either ductable or PAC type, so can you help me to calculate heat load and capacity of the AC to install.
Inverter. converter. Ups.MCB.solar.alternators. motors.
what is meant by class 1 E in electrical power supply?
Give the expression for the frequency of oscillations in an op-amp sine wave oscillator?
