Interested to Buy Any Domain ? << Click Here >> for more details...
why is cross over inlet provided in a furnace?
- 3 Answers
- 6205 Views
- Essar, I also Faced
- E-Mail Answers
Answer Posted / kaushik
cross over differentiate the convection and radiation
section of a furnace.
| Is This Answer Correct ? | 3 Yes | 3 No |
Post New Answer View All Answers
What are the reasons of removal of particles from effluent gas?
What are some of the consequences of an undersized kettle type reboiler?
What is a good method of analyzing powders for composition?
Where barrel pump use?
What is the Import Procurement Cycle ? and what are the customization steps in SAP ?
In Galvonised iron and stainsteel pipes, in which pipe friction losses will more and why ?
MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)
What are the apt definitions for apparent power, active power and reactive power?
How to size the cooling tower sump / basin for any given circulation rate? What is the guideline?
Explain how can viscosity affect the design of a mixer?
What are some common causes of control valve noise?
Explain how are vessel lined with glass or how are they coated?
Explain how do you design a vapor-liquid separator or a flash drum?
What types of metals are typically removed via chemical precipitation?
What are the merits of using a falling film evaporator?
