Interested to Buy Any Domain ? << Click Here >> for more details...
In Ferantti Effect Receiving end voltage is greater than
sending end voltage but how it is possible. I know its all
about charging current but give me some more detailed
explaination?
- 3 Answers
- 7164 Views
- I also Faced
- E-Mail Answers
Answer Posted / abhishek kunwar
at receiving end net reactive power is zero & go to leading
power factor.means it behave as light/open circuit.the 1/2LI^2
is converted to 1/2CV^2.means at open circuit
electromagnetic energy is converted into electrostatic
energy.therefore voltage rise up in receiving end is higher
than sending end.
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
how to calculate regulation constants for over head lines? and what are the regulation constant for raccoon conductor at different voltage level and different P.F?
why -48 volts dc used in telecommucation
What are the components of feedback control system?
What is the effect on power factor, shown by a trivector meter; incase of reverse phase sequence. If the power factor of a system is lag what meter will show in case of reverse phase sequence connected to the meter. and What in case of lead.
advantages & disadvantages of Lagging and leading power factor .
What do you mean by distribution transformers?
The electromagnetic torque developed is proportional to what in a D.C series motor?
How can we calculate cable size in Low voltage & high voltage
For overhead protection we use which transformer?
What are the advantages and disadvantages of closed-loop control system?
What are the different power system losses and how can it be eliminated?
1)How much current can a 3-1/2 core 100 mm wire carry? 2)What are the special cables required for explosion proof wiring? 3)In case you do not have coal and salt for earthing, how can you achieve good temporary earthing? 4)One horse power single phase motor is more likely to get hot than a one horse power 3 phase motor. Is it true or false, if true why? 5)What are the different types of soft starters for large motors?please explain?
My question is abt backlog.I had dropped one subject in my second year, and completed this subject in the 3rd attempt, so how many backlogs i have got?1 or 3?plz sujjest the answer as soon as possible
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
How to confirm the Phase shifting Transformer VECTOR GROUP relation , as below ZNy11.45d10.45-ZNYy0.15d11.15
