Interested to Buy Any Domain ? << Click Here >> for more details...
CAN 50Hz transformer work at 60 Hz power supply? if yes how
it is possible?
- 2 Answers
- 7243 Views
- I also Faced
- E-Mail Answers
Answer Posted / raghvendra kumar
Yes it is possible at 60 Hz also and it will work same as at
50 Hz but losses i.e. Eddy current loss is directly
propotional to square of frequency and hysteresis loss is
directly proporional to frequency (generally), so if we put
it on 60 Hz then more constant loss will occur which reduces
the efficiency as well as rating (due to Thermal limit).
| Is This Answer Correct ? | 13 Yes | 1 No |
Post New Answer View All Answers
why we are using earth pit in sub stations.?
What is different type of Electrical curve and how it protects the equipment's while up-normal situation?
Why we make earth connection with Transformer Body and What will be the minimum size of copper wire as per code with respect to KVA rating of Transformer?
What should be the values of settling time, peak time, steady state error, overshoot, rise time, MPOS (Maximum percent over shoot) to keep the system in transient state, to keep the system in steady state ?
During underground cabling in landscape area what did we cover the cable with to prevent the electric shock & protect the cable?
what are the stresses in circuit breakers ?
how to select the no. of brushes in a lap winding?
How to select HT/MV cable size ?
Sir 33kva 2 transformer load 900 amp calc 1800 amp mana jayega
Why back emf used for a dc motor? Highlight its significance.
What is dynamo?How it works and what is the function of dynamo in a DG.
why do we need to use 3c+3e cable, normally i select only 3c+e cable and i think it is enough. pls explain the usefull of 3e cable ( in this project the earthing system is well done)
what is the diference between the 4pole & 6pole DC Motors & what is advantage 6pole over the 4pole ?
i have interview in Pepsi company what type of question will ask please send the question and answeer
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
