Answer Posted / hasini

civil

difference between trapezoidal and pedestal footing and how the load acts on that

2873

---

1. HOW MUCH CEMENT AND SAND REQUIRED TO PLASTER 100 SQM WALL. 2. HOW MUCH CEMENT AND SAND REQUIRED FOR SCREED WORK OF AREA 30 SQM

3175

---

What distance in meters on the ground is the equivalent of one second of arc in longitude or latitude?

1096

---

Civil engineering material testing Standard results

2349

---

a solid steel rod length 2m dia and 20mm vertically hangs from celling and has a collar firmly atteched to it. above the collar an annular rubber washer of 40mm th. having stifness k = 5n/mm is placed. determine maximum stress in the rod caused by mass of 5 kg falling through a height of 1.2m.

2354

---

what is the use of steel rods of 16mm or 20mm used for 4.45mts for closing gutter.one mate consumes how many kgs with a gap of 6inches.

2393

---

What is oneside mat. And explain 

2584

---

Spider cracks occur in beam bottom due to––

2126

---

what is density of 20mm coarse aggregate.plz send answer my below adress e.mail

2139

---

brickwork labour rate per cum ?

1615

---

do you think we shall remove un wanted soil for foundation excavation even if the thickness of the soil strata is more than 8m ?

1663

---

Design a cantilever type retaining wall to retain sand for 4m above the ground. The sand fall slopes at the rate of 1 vertical to 2 horizontal. The weight of sand is 18000 N/m3, the angle of repose being 30. The safe bearing capacity of the soil is 200 kn/m2 at 1/25m below the ground level. Use m 15 concrete mix.

2826

---

How to avoid fly ash seed ball formations in the concrete mixer while mixing of raw materials for fly ash block manufacturing?

1899

---

Define angular dimension?

1204

---

Currently my house construction is going on but we just realized that the portico earth beam couldn't connect with the original earth because the beam rod not extended so Please advice

2640

---