Interested to Buy Any Domain ? << Click Here >> for more details...
What is surger vector in 33Kv transmission feeder? We have
AC power generator of 8MW which is paralleled with 33Kv EB
grid. Some times our HT breaker gets trip off due to surge
vector problem. How to over come it? Is there any device to
observe the surge and avoid tripping?
- 3 Answers
- 7659 Views
- I also Faced
- E-Mail Answers
Answer Posted / prem
you can use an M#3 relay for vector surge protection....
it is quiet useful and a little bit problamatis in programming
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
234 MVA Generator 3 phase Short circuit current Values required? Gen set Rating-234 MVA, Gen Voltage-18kv, PF;0.8, Xdv:23.5 %, Transformer Rating-18/380KV, 680MVA,Yndd1 two winding, Step up TR, ZT:35.50 %,X/R 4.33 Gen CB Position, CB open ,Disconnected open, Generator Running Voltage 18 Kv, Bi mistakes generator side earth switch Closed during that time short circuit current level in 3 Phase required, and how to test on site 234MVA Generator Short circuit current,
How to select a cable size for particular load?
Why does the radius of armature is less than the radius of pole shoe?
Disadventage of cable-gland earthing if any ?
description about dry type transformers
The Howland current source produces a A Unidirectional floating load current B Bidirectional single-ended load current C Unidirectional single-ended load current D Bidirectional floating load current
Briefly describe means used by electricity suppliers to influence the flow of active and reactive power in power networks (one for each type)?
why should small green grass ans small plant should not be there inside the transformer Yard in the factories
how to calculate earth fault relay current and CBCT ratio
During regenerative breaking= A rotating magnetic field is reversed B slip is positive C torque is positive D slip is negative
what is the size of ht cable of 33kv ht line and transformers ratings are 1 Mva and 5mva.please send formula also.
In Electrical 'Single Line Diagram' cable nomenclature shows "2 X 1C X 630sq.mm to be provided for one incomer. The question is how many cable to be proved for one Incomer.
1. If 8.35%Z means the percentage impedance of 132kV-line from power company, we will like to confirm its base capacity?
HOW TO CALCULATE CAPACITOR BANK OR HARMONIC FILTER CALCULATION
WHY MOSTLY Rph IS USED FOR CONTROL CIRCUITS AUX. SUPPLY ?
