Interested to Buy Any Domain ? << Click Here >> for more details...
how many minutes or seconds taken by the transmission of
electrical power from generating end to distributing end?
- 3 Answers
- 6133 Views
- I also Faced
- E-Mail Answers
Answer Posted / baldo2010
the time depends on the Power Transmitted and the lenght of
the transmission line from generation to receiving end.
| Is This Answer Correct ? | 3 Yes | 3 No |
Post New Answer View All Answers
pls tel me the electric train traction motors name plate details like rpm,torue,voltage,amps,watts..ect..
CAN U PLEASE TELL ME SOME G.D TOPICS FOR APGENCO INTERVIEW&G.D
If we use 250A MCCB as a incomer in Control panel for a fault level of 50kA for one second ,assuming temperature rise from 85 Deg. to 100 Deg , Then what will be the Aluminium Bus-bar size for 250A MCCB? Explain in detail.
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
What is superposition theorem?
How do we find the rating of a transformer, if it got burnt badly.
Control wiring of a dol starter for forward and backward
why do we have spikes enough to burn electronic boards, when generators are not grounded
What is the voltage gain or transfer function of amplifier?
what are the basic insulation levels & what its Unit
what is the function of choke in the flourcent tube lights and why the colour is in white mostly in flourcent tube lights
In which of the following case, the rotating magnetic field is reversed? A regenerative breaking B plugging C dynamic breaking D forward motoring
v/f drive basic princeple
What are the properties of a resistor?
When a single pase capacitor run motor- run on 230vac and Case(1)run with 8 Mfd 250 vac.capacitor , Case( 2) run with 8 Mfd 400vac capacitor. What is difference between both case regarding power ,efficiency etc?
