Interested to Buy Any Domain ? << Click Here >> for more details...
Motor and transformer working with same principle so why
motor rotates while transformer not?
- 7 Answers
- 10990 Views
- I also Faced
- E-Mail Answers
Answer Posted / ravikumar.g
The motor and transformer works on same princple yes.
But in motor three phase winding genarates Rotateing
magnetic flux it rotates the rotor.
But in the transformer the three phase winding genarates
alternating flux.
On thig is their no roatating part in the transformer.
| Is This Answer Correct ? | 11 Yes | 1 No |
Post New Answer View All Answers
1.What is captive power plant? 2.What is national grid?Give brief idea.
How the over load setting for HT Motors calculated-provided in Numerical Relay
what is p.s impedance measurement test in earthing transformer?
how meger function
What are the different types of hydro schemes?
What are the advantages of using distance protection schemes as opposed to normal overcurrent/ earth fault protection on high voltage feeders.
HOW CAN YOU CALCULATE PRACTICAL EFFICIENCY OF A ASYNCHRONOUS INDUCTIONMOTOR OF 7.5KW,& MOTOR IS RUNNING WITH AVOLTAGE OF 410 VOLTS,& TAKING CURENT OF 13 AMPS
Either the Armoured Earthing strip of HT 3 core cable have to pass through CB CT or not , why ???
IF alternator SCR value will be high means what happen in alternator efficency at operating power factor of 0.8
What are the components of feedback control system?
what is the min and max ohmic resistance for the earthing rod installed for lighting poles for street light network
After taking shutdown of 11kv feeder, if you see 5kv by phasing stick in the cable side, is it possible to close earth switch in cable.
What is VCB? where it is installed at SP. What is SP?
This is reqd for a 1MW Solar power plant..We have 2DC outputs from the solar panels Connected to 2INVERTOR panels.. Output from invertor is 3ph,280v,500kva,50hz.These are connected to individual ACB.This has to be stepped up to 11KV ,1250KVA SYSTEM.Now can I use (1) one more ACBTO GIVE A COMBINED OUTPUT OF 1000KVA,280V & STEP UP THE OUTPUT BY USING a single two winding 3 ph transformer 11kv/1250kva. or (2)use the two outputs and connect to one three winding transformer of above rating..Pls suggestwith details.
11KV AND 22KV NETWORK KW CAPACITY IN RING AND RADIAL?
