Answer Posted / jim

p=vicos0
p=5*0.746
=3.73kw
i=3.73/(440*0.85)=9.973amps

What is the effect of atmospheric pressure & Temp; on efficiency of motor? Why NGR(Neutral Grounding Resistor) is used in 132/11 KV Transformer & how? What is the use of Auto T/F in Grid Station?

1944

---

i want to put single phase load on scott connected transformer,eventhough how to balance the transformer.

1911

---

what is the difference between ac motor and dc generator

1903

---

How to confirm the Phase shifting Transformer VECTOR GROUP relation , as below ZNy11.45d10.45-ZNYy0.15d11.15

3320

---

why all the feeders are designed in a particular manner ... is there any reason for that???

2002

---

what is mean by Digital Logic Meter (DLM)

2440

---

what reactive how to maintain

1885

---

Is it possible to implement Restricted Earth Fault protection for a transformer without neutral CT?

4516

---

why h parameter are called as hybrid parameter?

2027

---

3phase cable calculation formula by motor load

1574

---

What is mathematical model of a control system?

1206

---

1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.

2111

---

How capacitor improves pf

1769

---

What should be the protection scheme for a 15kw, 3-phase motor working in a lathe machine.

2109

---

what r the safety measures in UPS ? explain all?

2265

---