Interested to Buy Any Domain ? << Click Here >> for more details...
what will happen when a electric bulb is connected between
two phases.it will glow or not
- 18 Answers
- 44778 Views
- I also Faced
- E-Mail Answers
Answer Posted / bk
The bulb rated for 220 [Max 240V] Volts, to be connected
between phase
and neutral. If it is connected between two phases the bulb
is subjected to root3 times 220volts and will get fused.
It can glow if Phase voltage below 150V each.
| Is This Answer Correct ? | 12 Yes | 8 No |
Post New Answer View All Answers
when we have to use UPF wattmeter and LPF wattmeter? what is the difference between UPF and LPF wattmeter in terms of construction?
what is the correct method for the outdoor termination of 19/33 KV HT cable step by step?
wat system call?
The power supplied to a 33microF capacitor from a 120V, 60Hz source will be
what is the function of capacitor duty contactor in an capacitor panel???
Why are lt windings placed near the core?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
why the India electrical supply transmission loss is high when compare to us
Dears we deal in Chemical are Plate earthing. Kindly call if any requirement and questions. Tech Earth Solutions Mohit Verma 8791071007
How to calculate the sag on transmission Lines.
what happen when power factor of 2 parallely operated transformer become equle?
How to know any size of cable if there are not written on cable? Answer must be theurical not by experience.
What is cathode ray oscilloscope (cro)?
what r substations?what r there work?why voltages r incresed and then reduced during distribution of power
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
