Golgappa.net | Golgappa.org | BagIndia.net | BodyIndia.Com | CabIndia.net | CarsBikes.net | CarsBikes.org | CashIndia.net | ConsumerIndia.net | CookingIndia.net | DataIndia.net | DealIndia.net | EmailIndia.net | FirstTablet.com | FirstTourist.com | ForsaleIndia.net | IndiaBody.Com | IndiaCab.net | IndiaCash.net | IndiaModel.net | KidForum.net | OfficeIndia.net | PaysIndia.com | RestaurantIndia.net | RestaurantsIndia.net | SaleForum.net | SellForum.net | SoldIndia.com | StarIndia.net | TomatoCab.com | TomatoCabs.com | TownIndia.com
Interested to Buy Any Domain ? << Click Here >> for more details...

what is the highest transmission voltage in India till now?

Answer Posted / anshul dixit

765 KV

Is This Answer Correct ?    15 Yes 6 No



Post New Answer       View All Answers


Please Help Members By Posting Answers For Below Questions

Whether IP65 enclosure box blocks ventilation if driver for LED have to enclosed inside IP65 box

2037


What is the function of auadag in a cro?

1071


FEINGING DECREASES THE FLUX DENSITY IN THE AIR GAP. HOW?

2134


how do i work out the Amps of a incommer if i am running 1 37 KW motor and a 0,75 KW motor and some solinoids

1850


We are preparing another project which involves Waste heat recovery from a 1 MW GE Engine. The Engine in particular gives out flue gas at 487Deg C with a flow rate of 5650 kg/hour and this can be cooled to 180 Deg C. This gives a thermal output of ~ 594 KW that is available for input to VAM via heat exchanger / boiler. Additionally 581 KW will be available from engine jacket water (temperature profile 80/ 80 Deg C and a flow rate of 50m3/hr) Our estimation is that 300 TR of cooling is possible with a suitable VAM machine(s). Please advise what is the most suitable arrangement with maximum TR and min Capital expenditure. plz reply me as early as possible

1934


How to protect sensitive loads such as Dosing pumps inside a factory from voltage surge/voltage fluctuation.

1754


how we findout a ignater is faulty or not?

2037


how to increase senstivity of ct

2371


can we find the inductance of a induction motor?

1919


Differenciate between circuit wiring and sub main wiring with illustrations

2183


What should be current in the Primary and secondary side of 1000KVA (11KV Supply)Transformer.?

1007


Is there possible to Test Transformer for Overfluxing Capability. Or is there any firm who does Overfluxing Test on Transformer?

3051


I have a relay contact rated at 220v dc which is supplied with a 24vdc from the panel,for it to trip the dampers(24vdc).What if the application of the relay changes so that it should work at its rated 220vdc then will it work at 24vdc supply given or any other consideration needs to be taken .....

2018


i need the curve duty cycle and amper for (150 kva @50% dyty cycle) transformer turn ratio :19 and vin 400

2061


what is conductor copnstant of ab cable

1819