Interested to Buy Any Domain ? << Click Here >> for more details...
what is mean by short coloumn?
it is depend on the height? or dia of coloumn.?
- 8 Answers
- 17456 Views
- I also Faced
- E-Mail Answers
Answer Posted / hemalata d m
SHORT OR LONG COLOUMN DEPENDS ON THE SLENDERNESS RATIO THAT
IS THE RATIO OF LENGTH TO RADIUS OF GYRATION. SO IT DEPENDS
ON THE LENGTH OF THE COLOUMN. IF SLENDERNESS RATIO IS LESS
THAN 12 THAEN IT IS CALLED AS A SHORT COLUMN & VICA VERSA
| Is This Answer Correct ? | 15 Yes | 2 No |
Post New Answer View All Answers
Difference between pre-tensioning and post-tensioning.
what is yield and tensile strength of steel, if steel has yeilding strength of 60 psi than how much its tensile strength?
sir tell me the formula for calculating the volume of 380mm dia double under reamed pile of 4.0 mts depth.
Calculate the maximum allowable speed on a horizontal curve of radius 350m if the maximum allowable values of the lateral coefficient of friction are 0.14 and the rate of superelevation is 0.08.
Suggest how many column, beem, etc required for 30 mtrs x 21 mtrs width x 8mtrs height for industrial shed of ground floor. I want to know the quantity of tmt steel consumption and Concrete consumption for budgeting
How to calculate cement, water, fly ash amount for 1 cum if the w/c ratio is 0.4 and fly ash to cement ratio is 1:9
a solid steel rod length 2m dia and 20mm vertically hangs from celling and has a collar firmly atteched to it. above the collar an annular rubber washer of 40mm th. having stifness k = 5n/mm is placed. determine maximum stress in the rod caused by mass of 5 kg falling through a height of 1.2m.
How to calculate plastering for elevated water storage tank
What is the crank length in the slab?
how to calculate Rate of analysis for 100 m3 Any ratio of concrete ? including labour
what radial pressure, the NP2 class rcc pipe can sustain?
How should we design a brick column and footing?(note: no reiforcement to be provided) Can you tell me any reference book where i could possibly find this design? Plz help urgently
I need to do a Compressive Strength Test for a specimen made of Rubber. Before doing the Test on the Machine, I need to have an idea of the Minimum and Maximum Compressive Strength or Yield Strength of the specimen. How can I calculate that?
What is OSHA compliance?
manhole height is 1500 mm and width of brickwork is 230 mm dia of manhole covering is 560 mm brick masonry 1:4 horizontal length is 1500 mm and plaster 12 mm thick on both side 1:3. how to estimate the quantity of brickwork with mortar cement and sand for manhole chamber.
