Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / ponnamalla venkata satish
ups means uninterpted power supply it is play very
important role in industrial process because the field
intruments should give continous signal to the control
system and if in case power has shut down due to abnormal
condition in plant then also control system need some
process parameters to avoid hazards so ups can give
continous supply to the field instrumens and as per the
requirment in the process
| Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
what is sevice settings for mccb?How can be it setted?
what is physical distance of isolator to VCB in 33/11kv sub stations
What is a copper loss or i2r loss pc?
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
What is steady state response?
how does an encoder work???
reason of diode failure in alternator
anyone knows service engineer in chennai for EDM SPARKING MACHINE.CHMER PULSE CD 60 M.pL GIVE ANY CONTACT NOS
Determine a suitable number of slors and conductors per slot for the starter 1 winding of a 3 phase, 3300 V. SO Hz 300 rpm alternator. The diameter is 2.3 m
how slip power recovery system work
What the difference between three phase contactor (coil 110vac) & three phase SSR (control voltage 110Vac)? May I use contactor in place of SSR?
What current flows in the transformer primary when its secondary is open?
Hello sir, pls send me hpcl technical test papers .i am. Appearing for the exam.
Why 3 phase induction motor getting supply in body if one of it's phase is cut
what is size of 3phase 4wire cable to be used for 11 ton ductable A.C and how to calculate cable size for different load
