Interested to Buy Any Domain ? << Click Here >> for more details...
I have 1500KVA transformer ,How much Maximum KW Load is
allowed?
- 15 Answers
- 68949 Views
- GKC Projects Limited GKCPL, I also Faced
- E-Mail Answers
Answer Posted / amit sonmale
A=KVA/P.F
=1500/0.8
=1875Amp.
A= w/1.732*V*0.8
1875=W/1.732*415*0.8
1875=w/557.024
1875*557.024=w
W=1044420
Then KW=1044420/1000
=1044.42
| Is This Answer Correct ? | 15 Yes | 42 No |
Post New Answer View All Answers
What do you mean by passive circuit elements and why these are called passive?
Has someone here done a sizing for a generator (3 phase), its for a pumping station. If you have an example for standby/duty and both running (I) star delta (ii) Soft Starter.
Why the power factor improvement is so important in industrial loads
can we use engine degreaser for electrical motors?
If 100 KAV USP dedicated earth got disconnect / Cut. What will happen at load.
WHAT IS THE USE OF PIG TAIL IN WINDOW CT ?
What Should be the value of Vector Surge angle at Tripping and how to calculate it?
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
why Lightening Arrester Probe sharp at Top of telecom tower.
What is cable tray, its type, and its support?
What is the purpose of using busbar mounting fuse?
DC transmission
Why does increasing the magnetic flux in the main field of a d.c motor cause the armature current to reduce??
what are the applications of TIG welding
Why AC & DC capacitor are use in UPS ??????????????????
