Interested to Buy Any Domain ? << Click Here >> for more details...
AC current is flowing in a wire in your home how can you
measure it(name of the instrument)
- 24 Answers
- 28422 Views
- NTPC, TCS, I also Faced
- E-Mail Answers
Answer Posted / chiranjit mondal
multimeter
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
How do you compute voltage drop and cable size over distance?
WHY IN AC DRIVES,INPUT PHASE CURRENT SHOW UNBALANCE?
HOW WE CALCULATE CURRENT IF THERE ARE NOT PRESENT ANY AMMETER OR MULTIMMETER??????
can you send me the placement papers of electrical engg. from companis like NTPC,DRDO,IOCL,HPCL,BPCL etc.?If,plz send as soon as possible.Thanks.
sir pls tell me . our ct specifications are 120/5 ,2 core , 0.2 and 5p10 class , 30va and 30va buden. insted of 30 va i want use 15 va. can i use?
Which device of PlC does share load between DG sets when DG are running in perallel?
Either the Armoured Earthing strip of HT 3 core cable have to pass through CB CT or not , why ???
what is arc flash and what are the hazards involved
Why ground terminal is used in pot meter 10k ohms
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
Can anyone tell the proper diagram of star delta starter????
how is positive, negative, zero sequence is happen.. how is effect on 3 phase system
In a large office how do we calculate required number of light fittings, assuming fittings are 4x18W or 2x36W fluorescent fitting ?
What is meant by Im=30mA@Vk/2. How to know the kee point voltage for CT design
what is the use of surge suppresser in 33 KV incoming panel. where it must be installed,inseries with incoming cable surge suppresser must be at incoming of the breaker are outgoing of the breaker
